Listing filters filter_list

All Products

close

Top Service Providers


What service do you need? SHOPPA ENQUERY

apps format_list_bulleted location_on
  • Open

    Kansai Nerolac Paints Limited

    Nerolac Cement Premium Wall PuttyRs 587 / KgProduct BrochureBrand NerolacRaw Material CementPackaging Size 20 kgs and 40 kgsColor WhiteUsage/Application Interior and Exterior concrete / mortar surfacesPackaging Type BagCompressive Strength 8.79 (7-12 Mpa)Coverage 1.85-2.32 sq.mt./kg. in double coat,on smooth normal mortar wallDry Adhesion 1.61 +/- 0.16(Lowest 1.36) (Min 0.8 Mpa)Water Retentivity 99.6 %Water Absorption 1.7 /10 minRecoating Period Min 3 hrs. (@27 +/- 2 deg C & RH 60+/- 5% )Thinning 30-35% with water Allow resultant paste to stand for 10 min. Remix again to get a uniform pasteStability of Thin Paint Use within 2 hrsNerolac Cement Putty is premium wall putty specially developed as a base coat to cover unevenness and pinholes in plastered surfaces and to make the walls / ceilings ready for painting. Nerolac Cement Putty does not require water curing.Features:Superior SmoothnessExcellent Water RepellencyDoes Not Require Water CuringNo FlakingReduction in CrackingExcellent Bonding to Base Plaster/ConcreteNo Need of Primer ApplicationNo Unpleasant SmellPrecautions:Refer MSDS for "Nerolac Cement Putty" for safety measures & precautions. Store in well ambient conditions, ventilated locations & away from sources of ignition and fire. Keep away from children. In case of eye / skin contact, wash with plenty of water. Inhalation / Injection is dangerous. In either case, move to fresh air & consult a medical practitioner. New plaster should be allowed to cure for minimum 12 weeks. Do not add excessive water. Mix the paste well before application. Apply by using putty knife. The bag must be tightly closed when not in use. Use safety equipment like rubber or polythene gloves, safety goggles / glasses & face mask. Always prepare a required quantity of putty and use it within 2 hrs. of mixing. Total thickness of the coats should not exceed 1.5 mm. Do not apply when ambient temperature might drop to a level below 10 C within 4 hours of application. After thinning, allow the paste to stand for 10 minutes. Remix again to get a uniform.Post application instructions:Apply primer & finishing coat within 7-8 days of application.Recommended system for application:For New Masonary Surfaces, For Interior SurfaceStep 1: Putty Nerolac Cement Putty Dry+ Step 2: Primer *(1 coat) Step 3: Finish Subsequent Finishing coat#For Exterior SurfaceStep 1: Putty Nerolac Cement Putty Dry+ Step 2: Primer **(1 coat)Step 3: Finish Subsequent Finishing coat# Currency: INR Min Order: Bulk Price : Ask for price Kansai Nerolac Paints Limited
  • Open

    Bhimineni Paints And Hardware

    Superior Smooth Finish Cement PuttyRs 800 / SackProduct BrochureBrand NerolacUsage/Application ConstructionPackaging Size 40 KgCoverage Area 1.86 to 2.32 Sq.Mt/Ltr/Caot on Smooth Normal MortarColor WhiteWater Retentivity Greater than or Equal to 95%Drying Time Recoting : Min 3 hrs at 27 Degree +/- 2 Degree C & RH 60 +/- 5%Thinning 30 to 35 % With Water, Allow Resultant Paste to Stand for 10 Minutes, Remix Again to Get a UniformStability of Thinned Paint Use Within 2 HoursNerolac Cement Putty is premium wall putty specially developed as a base coat to cover unevenness and pinholes in plastered surfaces and to make the walls / ceilings ready for painting. Nerolac Cement Putty does not require water curing. It is suitable for both interior and exterior application.Features & Benefits:Superior SmoothnessExcellent Water Repellency Does Not Require Water CuringNo Flaking Reduction in CrackingCan be Used on New & Old Walls/Ceilings Excellent Bonding to Base Plaster/ConcreteNo Need of Primer ApplicationNo Unpleasant Smell  Surface Preparation : Remove all loosely adhering material from the surface with the help of sand paper, wire brush or putty blade. The surface should be clean, free from dust, grease & loose materialRecommended Usage : Can be applied both, on interior and exterior concrete / mortar surfaces.Recommended System For Application :For New Masonry Surfaces And For Interior SurfaceMinimum 3-4 hrs. for the first coat. After the second coat, leave the surface to dry. Preferably for overnight.Nerolac Cement Primer (Water Thinnable / Solvent Thinnable) or Goody Universal Primer (Solvent Thinnable) or Goody Water Thinnable Cement Primer. Minimum 8 hrs for Solvent Thinnable Primer & Minimum 4 - 6 Hrs for Water Thinnable Primer.Please look for the individual finishing system given in the respective Product Data Sheets.Sand the surface with Emery Paper 180 and wipe clean before the application of subsequent coats.For Exterior Surface:Minimum 3-4 hrs. for the first coat. After the second coat, leave the surface to dry. Preferably for overnight.Nerolac Impressions Excel Anti-Peel / Nero-lac Suraksha Advanced / Nerolac Suraksha / Nerolac Exterior Primer.Please look for the individual finishing system given in the respective Product Data sheets.Sand the surface with Emery Paper 180 and wipe clean before the application of subsequent coats. Currency: INR Min Order: Bulk Price : Ask for price Bhimineni Paints And Hardware
  • Open

    Rcm Hardware

    Nerolac Cement Wall Putty Smooth FreshRs 780 / BagProduct Brochure :Usage/Application InteriorColor Super WhiteRaw Material AcrylicCategories Wall CoatingPutty Form PowderThinning 35% with water. Allow resultant paste to stand for 10 minutes. Remix again to get a uniformStability Of Thinned Paint 2 hrsNerolac Cement Wall Putty Smooth Fresh Currency: INR Min Order: Bulk Price : Ask for price Rcm Hardware
apps format_list_bulleted layers

#1 Business Directory and Service Provider

Shoppa holds millions of buyers who are willing to purchase the product at a negotiable rate. Enlist your business product and become Shoppa Seller right now.